Concrete Driveways Sydney
Durable, kerb-appeal driveways installed by Sydney's concrete specialists
A properly laid concrete driveway is one of the highest-return upgrades you can make to a Sydney home. Unlike pavers, which shift and weed over time, or asphalt, which softens in summer heat, a concrete driveway is structural, permanent, and low-maintenance for decades.
About Our Driveways Service
A properly laid concrete driveway is one of the highest-return upgrades you can make to a Sydney home. Unlike pavers, which shift and weed over time, or asphalt, which softens in summer heat, a concrete driveway is structural, permanent, and low-maintenance for decades.
At Dominate Concrete we install concrete driveways across all of Sydney Metro — from tight inner-city terrace driveways to sprawling outer-metro properties. Every driveway is poured with correctly graded N25 or N32 concrete, properly dimensioned mesh or rebar reinforcement, and finished to the level of detail your project demands.
We handle everything: existing surface removal, subgrade preparation, formwork, pour, finish, curing, and cleanup. One crew, one quote, no subcontractors passing the buck.
Price Guide
Typical 40m² driveway
Price range for a 40m² driveway in Sydney Metro. Final price confirmed after free site inspection.
Calculate Your Price →Driveways Options We Offer
Every project is different — we match the right specification to your needs and budget.
Broom Finish Driveway
The most popular choice for Sydney driveways. A light broom texture provides grip without being abrasive, handles car traffic well, and looks clean for years.
From $85/m² labourPlain Float Driveway
Smooth trowel finish — suited to garages, workshop floors, and indoor-outdoor transitions where a flat, seamless look is required.
From $75/m² labourColoured Concrete Driveway
Iron oxide pigments blended through the concrete batch give permanent, through-body colour that won't peel or flake. Popular in charcoal, slate, and sandstone tones.
From $100/m² labourExposed Aggregate Driveway
River pebble, quartz, or decorative stone is seeded into the surface and the top layer washed to expose the aggregate. Slip-resistant, durable, and visually striking.
From $120/m² labourDecorative / Pattern Imprinted Driveway
Concrete stamped with cobblestone, slate, timber, or tile patterns while still plastic. Achieves the look of premium paving at a fraction of the long-term maintenance cost.
From $160/m² labourOur Driveways Process
What to expect from the first call to finished product.
Site assessment and free quote — we assess access, existing surface, soil conditions, and drainage before quoting
Demolition and subgrade prep — old concrete or pavers are removed, the base is graded and compacted to specification
Formwork and reinforcement — edge boards set to level, steel mesh or rebar laid and chaired at correct depth
Pour and finish — concrete is placed, consolidated, and finished to your chosen texture while still plastic
Curing and protection — the slab is cured and protected from traffic for 24–48 hours, vehicle strength reached by day 28
Why Choose Us
Sydney's Trusted Concreters for Driveways
- ✓15+ years installing driveways across Sydney Metro
- ✓Licensed concrete contractor — NSW Builder's Licence
- ✓Fully insured — public liability & workers compensation
- ✓Free site quotes with no obligation
- ✓Real pricing based on current Sydney supplier rates
- ✓On-time scheduling and clean site, guaranteed
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost estimate based on current Sydney Metro supplier pricing. Adjust any field and your concrete quote updates instantly.
e.g. 40 for a standard driveway
Driveways — Frequently Asked Questions
Common questions from Sydney homeowners and builders.
How much does a concrete driveway cost in Sydney?
A standard 40m² concrete driveway in Sydney Metro with N25 concrete, broom finish, and mesh reinforcement typically costs $5,500–$6,500 including GST. Exposed aggregate driveways of the same size run $7,500–$9,000, and decorative pattern driveways $9,500–$12,000. The price per m² ranges from approximately $115–$180 all-in depending on finish and location.
What concrete grade do I need for a driveway?
N25 is the standard for residential driveways in Sydney. It handles passenger vehicles, SUVs, and light trailers comfortably. If you regularly bring in caravans, trucks, or heavy delivery vehicles, step up to N32. We auto-suggest the right grade based on your project during quoting.
How thick should a concrete driveway be?
100mm is the standard residential driveway thickness and complies with AS 3600. For heavy vehicles or loaded trailers, 125–150mm is recommended. Proper sub-base compaction matters as much as thickness — a 100mm slab on a prepared base outperforms a 150mm slab on poor ground.
Do I need council approval for a concrete driveway in Sydney?
In most Sydney LGAs, replacing an existing driveway does not require council approval as it falls under exempt development. New driveway crossovers (connecting to the kerb) usually require a council permit and may need to meet specific width requirements. We can advise on your specific council's requirements during the site quote.
How long does a concrete driveway take to dry?
Concrete is walkable after 24–48 hours and ready for light vehicle traffic after 7 days. Full structural strength (28-day cure) is reached after four weeks. We use curing compound and advise against heavy loads in the first week.
Should I seal my concrete driveway?
Sealing is recommended for coloured concrete, exposed aggregate, and decorative finishes to enhance colour and protect the surface. Plain broom and float driveways can be left unsealed or sealed with a penetrating sealer for stain resistance. We can advise on the right sealer for your finish type.
Related Concrete Services
Exposed Aggregate Concrete Sydney
Exposed aggregate is the most popular premium concrete finish in Sydney for good reason. By washing back the top layer of cement paste to reveal the stone aggregate beneath, you get a naturally textured surface that grips underfoot, hides minor marks and tyre rubber, and looks exceptional for decades with minimal maintenance.
Learn more →Coloured Concrete Sydney
Coloured concrete uses iron oxide pigments mixed through the concrete batch before it's poured. Unlike a surface paint or stain, the colour runs the full depth of the slab — it cannot peel, flake, or wear off because it's in the concrete itself. In Sydney's UV-intense climate, this makes it a far more durable aesthetic choice than any surface-applied colour treatment.
Learn more →Decorative Concrete Sydney
Decorative concrete — also called pattern-imprinted, stamped, or stencilled concrete — gives you the high-end look of slate, cobblestone, timber, or terracotta tile at significantly lower long-term cost than real paving. The pattern is pressed into the concrete surface while it's still plastic, creating a permanent, monolithic finish without the joints, movement, and weed problems that pavers develop over time.
Learn more →Concrete Paths Sydney
A well-laid concrete path does more for a property than most owners expect — it improves accessibility, creates visual order in the garden, reduces mud tracking, and adds kerb appeal that shows up in property valuations. Unlike paving, gravel, or timber, concrete paths are permanent, weed-free, and require no maintenance beyond an occasional clean.
Learn more →Ready to Start Your Driveways Project?
Call us or send an enquiry and we'll get back within 2 hours with a confirmed quote.