Concrete Rockdale
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Rockdale 2216. A 40m² driveway on a level site costs $8,100–$8,800 here, including GST.
5.0 on GoogleBotany Bay sands and Sutherland sandstone
What affects a concrete job in Rockdale
Rockdale sits on low, sandy ground near Botany Bay, with apartments along the rail line and older homes around them. Sand bases need thorough compaction, and low-lying blocks need careful drainage.
South Sydney covers two very different grounds. More on concreting in South Sydney →
Local council
Bayside Council. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs Bayside Council's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
Low-lying and flood-affected land
Parts of the suburb are low-lying.
Strata approval
Work on common property needs owners corporation approval, and building managers often ask for the contractor's insurance certificates and a work method statement.
Concrete prices in Rockdale
From our calculator, priced for the metro delivery zone ($85 delivery surcharge per load). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,100–$8,800 |
| Replacing a cracked 40m² driveway (break out, dispose, minor levelling) | $11,300–$14,250 |
| 20m² rear courtyard, replacing old concrete, hand access with a line pump | $9,050–$11,800 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Rockdale
What Bayside Council requires for driveways, crossings, garages and front setbacks. Taken from its own planning documents, with every rule linked to its source.
Bayside Technical Specification: Traffic, Parking and Access (2023)
Crossing & approvals
A house on a single street frontage can have one access driveway up to 4.5m wide at the boundary, or two of up to 3m each separated by at least 6m of kerb. Crossings are never narrower than 2.7m.
Bayside Traffic, Parking and Access Spec, 3.1.5(a)(i)Driveway
Domestic driveways are at least 3.0m wide inside the property (3.6m where there are high walls either side), and the grade over the footpath is set by council when you lodge a Vehicular Entrance / Driveway Application.
Bayside Traffic, Parking and Access Spec, 3.1.4(a)–(c)Driveway
Maximum driveway grade is 1 in 4 (25%). On steep driveways, cars must be able to enter and leave forwards, using a turning bay or turntable.
Bayside Traffic, Parking and Access Spec, 3.1.4(d)
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$222–$392/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$8,884 – $15,685
Concrete Rockdale: common questions
How much does a concrete driveway cost in Rockdale?
A 40m² broom-finish driveway in Rockdale (N25, 100mm, SL72 mesh) costs $8,100–$8,800 including GST on a level site, which includes the $85 delivery surcharge for the metro delivery zone. Replacing an existing cracked driveway costs $11,300–$14,250, because the old concrete has to be broken out and carted away. One of the most common jobs here (replacing a cracked 40m² driveway (break out, dispose, minor levelling)) comes to $11,300–$14,250. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Rockdale?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so Bayside Council must approve it under the Roads Act. A house on a single street frontage can have one access driveway up to 4.5m wide at the boundary, or two of up to 3m each separated by at least 6m of kerb. Crossings are never narrower than 2.7m.
What ground conditions affect concrete in Rockdale?
Botany Bay sands and Sutherland sandstone. Rockdale sits on low, sandy ground near Botany Bay, with apartments along the rail line and older homes around them. Sand bases need thorough compaction, and low-lying blocks need careful drainage.
Do you work in Rockdale (2216)?
Yes. Rockdale is in our metro delivery zone, which carries a $85 delivery surcharge per load. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Rockdale job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.