Concrete Liverpool
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Liverpool 2170. A 40m² driveway on a level site costs $8,300–$9,000 here, including GST.
5.0 on GoogleHighly reactive clay from Bringelly shale
What affects a concrete job in Liverpool
Liverpool has apartments in the centre and established homes and newer estates around it, on clay soils near the Georges River. River-side streets are flood-affected, and summer heat means early-morning pours.
Western Sydney is built on clay weathered from Bringelly and Ashfield shale, and some of it is among the most reactive soil in the city. More on concreting in Western Sydney →
Local council
Liverpool City Council. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs Liverpool City Council's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
Low-lying and flood-affected land
Parts of the suburb are low-lying.
Strata approval
Work on common property needs owners corporation approval, and building managers often ask for the contractor's insurance certificates and a work method statement.
Concrete prices in Liverpool
From our calculator, priced for the outer metro delivery zone ($220 delivery surcharge per load). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,300–$9,000 |
| Replacing a cracked 40m² driveway (break out, dispose, minor levelling) | $11,500–$14,400 |
| 35m² alfresco slab, broom finish | $8,200–$9,450 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Liverpool
Liverpool City Council sets its own driveway, crossing and setback controls; check its planning controls before you design. We'll confirm what applies at the site visit.
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$226–$396/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$9,050 – $15,851
Concrete Liverpool: common questions
How much does a concrete driveway cost in Liverpool?
A 40m² broom-finish driveway in Liverpool (N25, 100mm, SL72 mesh) costs $8,300–$9,000 including GST on a level site, which includes the $220 delivery surcharge for the outer metro delivery zone. Replacing an existing cracked driveway costs $11,500–$14,400, because the old concrete has to be broken out and carted away. One of the most common jobs here (replacing a cracked 40m² driveway (break out, dispose, minor levelling)) comes to $11,500–$14,400. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Liverpool?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so Liverpool City Council must approve it under the Roads Act.
What ground conditions affect concrete in Liverpool?
Highly reactive clay from Bringelly shale. Liverpool has apartments in the centre and established homes and newer estates around it, on clay soils near the Georges River. River-side streets are flood-affected, and summer heat means early-morning pours.
Do you work in Liverpool (2170)?
Yes. Liverpool is in our outer metro delivery zone, which carries a $220 delivery surcharge per load. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Liverpool job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.