Concrete Kellyville
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Kellyville 2155. A 40m² driveway on a level site costs $8,300–$9,000 here, including GST.
5.0 on GoogleShale clay on rolling, sloping blocks
What affects a concrete job in Kellyville
Kellyville is largely estates built from the 1990s onwards on reactive clay, with near-level engineered lots. New driveways, alfresco slabs and side paths for recently built homes are the common jobs.
The Hills District is rolling country on shale-derived clay. More on concreting in the Hills District →
Local council
The Hills Shire Council. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs The Hills Shire Council's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
New-estate rules
Many estates have design guidelines or covenants covering driveway colour and finish, so check yours before choosing.
Concrete prices in Kellyville
From our calculator, priced for the outer metro delivery zone ($220 delivery surcharge per load). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,300–$9,000 |
| 40m² exposed aggregate driveway on a new-build lot | $11,000–$12,450 |
| 35m² alfresco slab, broom finish | $8,200–$9,450 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Kellyville
What The Hills Shire Council requires for driveways, crossings, garages and front setbacks. Taken from its own planning documents, with every rule linked to its source.
The Hills DCP 2012, Part B Section 2 Residential (in force 6 May 2022)
Garages & parking
Garages must be set back at least 5.5m from the front boundary (or the required building setback if greater) so a car parked in front of the garage doesn't overhang the road reserve.
The Hills DCP 2012 Part B2, 2.14.1(e)Garages & parking
Garages should be no wider than 6.5m and no more than 50% of the property's width at the building line, and at least one car space must be behind the front building line.
The Hills DCP 2012 Part B2, 2.14 (garage design; car parking (d))Front setback
The minimum front setback is 10m on classified roads; on other streets it depends on the area, and the existing streetscape pattern can require more.
The Hills DCP 2012 Part B2, 2.14.1(a)–(b)
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$226–$396/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$9,050 – $15,851
Concrete Kellyville: common questions
How much does a concrete driveway cost in Kellyville?
A 40m² broom-finish driveway in Kellyville (N25, 100mm, SL72 mesh) costs $8,300–$9,000 including GST on a level site, which includes the $220 delivery surcharge for the outer metro delivery zone. Replacing an existing cracked driveway costs $11,500–$14,400, because the old concrete has to be broken out and carted away. One of the most common jobs here (40m² exposed aggregate driveway on a new-build lot) comes to $11,000–$12,450. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Kellyville?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so The Hills Shire Council must approve it under the Roads Act.
What ground conditions affect concrete in Kellyville?
Shale clay on rolling, sloping blocks. Kellyville is largely estates built from the 1990s onwards on reactive clay, with near-level engineered lots. New driveways, alfresco slabs and side paths for recently built homes are the common jobs.
Do you work in Kellyville (2155)?
Yes. Kellyville is in our outer metro delivery zone, which carries a $220 delivery surcharge per load. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Kellyville job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.