Concrete Glebe
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Glebe 2037. A 40m² driveway on a level site costs $8,000–$8,700 here, including GST.
5.0 on GoogleOld fill, clay and sand over shale
What affects a concrete job in Glebe
Glebe is Victorian terraces and villas on streets that fall steeply towards Blackwattle and Rozelle Bays. Heritage conservation areas cover much of it, and steep rear yards often need a line pump to get concrete down to the pour.
Most inner-city blocks sit on decades of fill over clay or sand, and a lot of the low ground around Alexandria, Waterloo and Zetland was swamp or industrial land before it was built on. More on concreting in Inner Sydney →
Local council
City of Sydney. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs the City of Sydney's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
Access through the house or lane
With no side passage, concrete has to be barrowed or pumped in from the street or rear lane.
Heritage conservation areas
In a heritage conservation area, the City of Sydney can require approval to change a front driveway, path or fence.
Sloping driveways
Levels have to be set at the kerb, the garage and every change of grade so cars don't scrape.
Concrete prices in Glebe
From our calculator, priced for the inner delivery zone (no delivery surcharge). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,000–$8,700 |
| 20m² rear courtyard, replacing old concrete, hand access with a line pump | $8,950–$11,700 |
| 20m × 1.2m side access path, 100mm, broom finish | $5,550–$6,400 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Glebe
What the City of Sydney requires for driveways, crossings, garages and front setbacks. Taken from its own planning documents, with every rule linked to its source.
Sydney DCP 2012
Driveway
Car access across the front boundary is not permitted for terrace houses or for properties in heritage conservation areas.
Sydney DCP 2012, 4.1.9(5)Garages & parking
Car spaces and garages must sit behind the main building line, and excavated basement garages for single dwellings aren't permitted unless reached from a rear lane.
Sydney DCP 2012, 4.1.9(2)–(3)Crossing & approvals
You need a City of Sydney driveway permit before building, repairing or changing a driveway crossing. You can use your own contractor or ask the City to build it, but vehicle access must already exist or have been approved in a development consent.
City of Sydney: driveway approvals
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$219–$389/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$8,779 – $15,580
Concrete Glebe: common questions
How much does a concrete driveway cost in Glebe?
A 40m² broom-finish driveway in Glebe (N25, 100mm, SL72 mesh) costs $8,000–$8,700 including GST on a level site, which has no delivery surcharge, as Glebe is in our inner delivery zone. Replacing an existing cracked driveway costs $11,200–$14,150, because the old concrete has to be broken out and carted away. One of the most common jobs here (20m² rear courtyard, replacing old concrete, hand access with a line pump) comes to $8,950–$11,700. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Glebe?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so the City of Sydney must approve it under the Roads Act. You need a City of Sydney driveway permit before building, repairing or changing a driveway crossing. You can use your own contractor or ask the City to build it, but vehicle access must already exist or have been approved in a development consent.
What ground conditions affect concrete in Glebe?
Old fill, clay and sand over shale. Glebe is Victorian terraces and villas on streets that fall steeply towards Blackwattle and Rozelle Bays. Heritage conservation areas cover much of it, and steep rear yards often need a line pump to get concrete down to the pour.
Do you work in Glebe (2037)?
Yes. Glebe is in our inner delivery zone, with no delivery surcharge. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Glebe job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.