Concrete Waverley
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Waverley 2024. A 40m² driveway on a level site costs $8,000–$8,700 here, including GST.
5.0 on GoogleSandstone headlands and coastal sand
What affects a concrete job in Waverley
Waverley is Federation semis and terraces on hilly streets between Bondi Junction and Bronte. Narrow frontages and steep driveways are common, so access and grading usually drive the cost more than the concrete itself.
The Eastern Suburbs split into two kinds of ground. More on concreting in the Eastern Suburbs →
Local council
Waverley Council. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs Waverley Council's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
Sloping driveways
Levels have to be set at the kerb, the garage and every change of grade so cars don't scrape.
Access through the house or lane
With no side passage, concrete has to be barrowed or pumped in from the street or rear lane.
Concrete prices in Waverley
From our calculator, priced for the inner delivery zone (no delivery surcharge). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,000–$8,700 |
| 40m² sloping driveway with a 100–300mm cut and pump | $11,400–$13,800 |
| 20m² rear courtyard, replacing old concrete, hand access with a line pump | $8,950–$11,700 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Waverley
Waverley Council sets its own driveway, crossing and setback controls; check its planning controls before you design. We'll confirm what applies at the site visit.
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$219–$389/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$8,779 – $15,580
Concrete Waverley: common questions
How much does a concrete driveway cost in Waverley?
A 40m² broom-finish driveway in Waverley (N25, 100mm, SL72 mesh) costs $8,000–$8,700 including GST on a level site, which has no delivery surcharge, as Waverley is in our inner delivery zone. Replacing an existing cracked driveway costs $11,200–$14,150, because the old concrete has to be broken out and carted away. One of the most common jobs here (40m² sloping driveway with a 100–300mm cut and pump) comes to $11,400–$13,800. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Waverley?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so Waverley Council must approve it under the Roads Act.
What ground conditions affect concrete in Waverley?
Sandstone headlands and coastal sand. Waverley is Federation semis and terraces on hilly streets between Bondi Junction and Bronte. Narrow frontages and steep driveways are common, so access and grading usually drive the cost more than the concrete itself.
Do you work in Waverley (2024)?
Yes. Waverley is in our inner delivery zone, with no delivery surcharge. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Waverley job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.