Concrete Rose Bay
Driveways, Slabs & Paths
Driveways, slabs, paths and pool surrounds in Rose Bay 2029. A 40m² driveway on a level site costs $8,000–$8,700 here, including GST.
5.0 on GoogleSandstone headlands and coastal sand
What affects a concrete job in Rose Bay
Rose Bay runs from harbourside flats up steep sandstone slopes towards Vaucluse and Dover Heights. Hillside homes need cut driveways and pump access; homes on the flat near the water have easier access but a higher water table.
The Eastern Suburbs split into two kinds of ground. More on concreting in the Eastern Suburbs →
Local council
Woollahra Municipal Council. The section between your boundary and the kerb is council land, so a new or rebuilt driveway crossing needs Woollahra Municipal Council's approval and has to match the levels it issues. We'll tell you at the site visit whether your job touches it.
Sloping driveways
Levels have to be set at the kerb, the garage and every change of grade so cars don't scrape.
Concrete prices in Rose Bay
From our calculator, priced for the inner delivery zone (no delivery surcharge). N25 concrete, SL72 mesh, GST included.
| Job | Estimate |
|---|---|
| 40m² broom driveway, level site (baseline) | $8,000–$8,700 |
| 40m² sloping driveway with a 100–300mm cut and pump | $11,400–$13,800 |
| 40m² exposed aggregate pool surround replacing pavers | $11,950–$14,350 |
Estimates only. Excavation, rock, access and what's under the existing surface are confirmed at a free site inspection.
Driveway and setback rules in Rose Bay
What Woollahra Municipal Council requires for driveways, crossings, garages and front setbacks. Taken from its own planning documents, with every rule linked to its source.
Woollahra DCP 2015, Chapter B3 General Development Controls
Crossing & approvals
Only one driveway entrance is allowed; where there's more than one dwelling, they share it.
Woollahra DCP 2015, B3.6 C10Front setback
The front setback is the average of the three most typical setbacks among the four closest houses facing the same side of the street.
Woollahra DCP 2015, B3.2.2 C1Driveway
Driveway width must be kept to the minimum needed to meet the Australian Standards, and semi-porous surfaces are used for uncovered parking and driveways where soil and drainage allow.
Woollahra DCP 2015, B3.6 C9, C11
Rules that apply anywhere in NSW
A driveway, hardstand or paving on your own land is exempt from planning approval only if it isn't in a heritage conservation area, on a heritage item, in a foreshore or environmentally sensitive area, drains to an existing stormwater system, and is built to AS/NZS 2890.1. Otherwise it needs a DA or CDC.
NSW Codes SEPP, exempt development: driveways, pathways and pavingAnything built on or over the footpath or road, including the vehicle crossing and layback, needs approval from the council (or Transport for NSW on State roads) under the Roads Act 1993, even when the work on your land is exempt or already approved.
NSW Codes SEPP, exempt development: driveways, pathways and pavingDriveway grades follow AS/NZS 2890.1: generally no steeper than 25% (1 in 4) within the property, and any change in grade over 12.5% (1 in 8) needs a transition, usually about 2m long, so cars don't scrape.
AS/NZS 2890.1, as applied in Hunters Hill Council's driveway specification
Summarised from council documents, checked October 2026. Councils update their controls, and site-specific controls can apply, so confirm with council or your certifier before you build.
Instant Estimate
Concrete Price Calculator — Sydney
Get a real-time concrete cost range based on current Sydney Metro supplier pricing — including the site preparation and excavation most calculators leave out.
e.g. 40 for a standard driveway
Site preparation is the biggest variable
Excavation, demolition and spoil removal routinely make up 25–40% of a concreting job and can't be priced accurately without seeing the site. Answer these three questions as best you can — your estimate widens or narrows accordingly.
Estimated Range (incl. GST)
$219–$389/m² all-in
⚠ Site inspection needed to firm this up
- •You're not sure what excavation is needed — this is the single biggest variable in the price.
Send us photos with your quote request and we'll narrow this range before we visit.
Cost Breakdown
⚠ Site Prep — estimate only
Estimate only — not a fixed-price quote. Excavation, demolition and ground conditions are charged on what the site actually requires and are confirmed after a free site inspection.
Estimated Range (incl. GST)
$8,779 – $15,580
Concrete Rose Bay: common questions
How much does a concrete driveway cost in Rose Bay?
A 40m² broom-finish driveway in Rose Bay (N25, 100mm, SL72 mesh) costs $8,000–$8,700 including GST on a level site, which has no delivery surcharge, as Rose Bay is in our inner delivery zone. Replacing an existing cracked driveway costs $11,200–$14,150, because the old concrete has to be broken out and carted away. One of the most common jobs here (40m² sloping driveway with a 100–300mm cut and pump) comes to $11,400–$13,800. The price is confirmed at a free site inspection.
Do I need council approval for a driveway in Rose Bay?
A driveway on your own land is only exempt from approval if it isn't in a heritage conservation area, on a heritage item or in a foreshore or environmentally sensitive area, drains to stormwater and meets AS/NZS 2890.1. Otherwise it needs a DA or CDC. The crossing between your boundary and the kerb is council land, so Woollahra Municipal Council must approve it under the Roads Act. Only one driveway entrance is allowed; where there's more than one dwelling, they share it.
What ground conditions affect concrete in Rose Bay?
Sandstone headlands and coastal sand. Rose Bay runs from harbourside flats up steep sandstone slopes towards Vaucluse and Dover Heights. Hillside homes need cut driveways and pump access; homes on the flat near the water have easier access but a higher water table.
Do you work in Rose Bay (2029)?
Yes. Rose Bay is in our inner delivery zone, with no delivery surcharge. We work Monday to Saturday, 6am–5pm, and can usually arrange a site visit within 48 hours of your enquiry.
Get a quote for your Rose Bay job
Get your personalised quote from a vetted, licensed concreter near you. Call us or send an enquiry and a licensed concreter will get in touch quickly to book a free site inspection and give you a fixed price.